{"product_id":"pirw-t10-wired-pir-sensor","title":"PIRW-T10 wired PIR Sensor","description":"\u003ch2\u003ePIRW-T10 wired PIR Sensor\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuy on Amazon:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.amazon.in\/dp\/B0HKZGZRC2\"\u003eCLICK HERE TO BUY ON AMAZON\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp dir=\"auto\" class=\"PDq2pG_selectionAnchorContainer\"\u003eThe \u003cstrong\u003eNAVKAR SYSTEMS Passive Infrared Motion Detector\u003c\/strong\u003e is a dual-element PIR security sensor designed to detect movement within a protected indoor area. It uses a \u003cstrong\u003edual-element infrared sensing element with digital processing technology\u003c\/strong\u003e to identify motion and provide an alarm signal to a compatible security alarm system.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eWith a \u003cstrong\u003e12-meter detection range\u003c\/strong\u003e and \u003cstrong\u003e110° detection angle\u003c\/strong\u003e, the detector provides broad-area coverage when installed at the recommended height of approximately \u003cstrong\u003e2.2 meters\u003c\/strong\u003e. It operates on \u003cstrong\u003eDC 12V power\u003c\/strong\u003e and provides a normally closed alarm relay output for connection to a compatible alarm panel. The built-in \u003cstrong\u003ered LED indicator\u003c\/strong\u003e provides visual indication when motion is detected, while the LED jumper allows the installer to enable or disable the alarm indication during normal operation.\u003c\/p\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e PIRW-T10\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dual-Element Passive Infrared (PIR) Motion Detector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e NAVKAR SYSTEMS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e DC 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommunication:\u003c\/strong\u003e Wired\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Range:\u003c\/strong\u003e Up to 12 m detection distance with 110° detection angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Plastic housing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 130 × 68 × 45 mm\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 50g\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther Specifications:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor:\u003c\/strong\u003e Dual-element PIR sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection Speed:\u003c\/strong\u003e 0.2–7 m\/sec\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Installation Height:\u003c\/strong\u003e Approx. 2.2 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e Adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Compensation:\u003c\/strong\u003e NIC compensation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm Indicator:\u003c\/strong\u003e Red LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm Output:\u003c\/strong\u003e N.C., 28V DC, 0.15A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-Tamper Output:\u003c\/strong\u003e N.C., 28V DC, 0.15A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -20°C to +50°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Humidity:\u003c\/strong\u003e Up to 95%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePet Immunity:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Control:\u003c\/strong\u003e LED ON\/OFF jumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Wall-mounted indoor security application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor Technology:\u003c\/strong\u003e Infrared sensing with digital processing\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\" class=\"PDq2pG_selectionAnchorContainer\"\u003eApplications\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHome Security\u003c\/strong\u003e – Motion detection for living rooms, bedrooms, hallways, entrances and other indoor areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffice Security\u003c\/strong\u003e – Helps monitor offices, cabins, reception areas and other restricted indoor spaces for unauthorized movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShops \u0026amp; Commercial Premises\u003c\/strong\u003e – Suitable for detecting movement in retail shops, small commercial spaces and protected areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEntrance \u0026amp; Passage Monitoring\u003c\/strong\u003e – Can be positioned to monitor areas where a person is expected to pass through the detector's detection pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm System Integration\u003c\/strong\u003e – Provides an NC alarm output for connection to a compatible wired security alarm panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eSuitable For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor Security Applications\u003c\/strong\u003e – Designed for indoor motion detection where a compatible wired alarm system is available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHomes, Offices \u0026amp; Shops\u003c\/strong\u003e – Suitable for residential and commercial environments requiring basic intrusion\/motion monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall Installation\u003c\/strong\u003e – The supplied manual specifies installation at approximately \u003cstrong\u003e2.2 m height\u003c\/strong\u003e with the detector positioned to cover the required area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen Detection Areas\u003c\/strong\u003e – Best suited to locations with a clear view of the protected area and minimal obstructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControlled-Temperature Areas\u003c\/strong\u003e – Suitable within its specified \u003cstrong\u003e-20°C to +50°C\u003c\/strong\u003e operating temperature range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eNot Suitable For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor Installation\u003c\/strong\u003e – The supplied documentation describes the detector for indoor security use; it should not be treated as an outdoor\/weatherproof PIR.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePet-Sensitive Installations\u003c\/strong\u003e – The supplied specification states \u003cstrong\u003ePet Immunity: No\u003c\/strong\u003e, so movement from pets may be detected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAreas Facing Heat Sources\u003c\/strong\u003e – Avoid pointing the detector toward heaters, ovens, radiators, air-conditioning vents or other sources of changing temperature, as these can affect PIR detection. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Sunlight or Windows\u003c\/strong\u003e – Avoid locations where direct sunlight or strong infrared sources can fall within the detector's field of view. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eObstructed Detection Areas\u003c\/strong\u003e – Large furniture, curtains, plants or other objects that block the detector's field of view can reduce the effective detection coverage. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAreas Requiring Wireless Communication\u003c\/strong\u003e – This is a \u003cstrong\u003ewired PIR detector\u003c\/strong\u003e and requires physical wiring to a compatible alarm panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\" class=\"PDq2pG_selectionAnchorContainer\"\u003ePackage Contents\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePIRW-T10 Passive Infrared Detector\u003c\/strong\u003e – 1 × wired dual-element PIR motion detector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Accessories\u003c\/strong\u003e – Fixing components required for mounting the detector, as supplied with the product.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Documentation\u003c\/strong\u003e – User\/installation instructions for setup and operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eInstallation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelect the Installation Location\u003c\/strong\u003e – Choose a stable indoor location where the detector has a clear view of the area to be protected. Avoid direct sunlight, strong heat sources and locations with excessive airflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet the Mounting Height\u003c\/strong\u003e – Install the detector at approximately \u003cstrong\u003e2.2 m\u003c\/strong\u003e above the floor, as specified for the PIRW-T10.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFix the Detector\u003c\/strong\u003e – Secure the detector housing firmly to the wall using suitable fixing hardware. The mounting surface should be stable and free from excessive vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition the Detection Area\u003c\/strong\u003e – Orient the detector toward the area where movement is expected. Keep the \u003cstrong\u003e12 m \/ 110°\u003c\/strong\u003e detection area as unobstructed as practical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect Power and Alarm Wiring\u003c\/strong\u003e – With the power switched OFF, connect the detector to the compatible security alarm panel according to the required terminals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjust Sensitivity\u003c\/strong\u003e – Set the sensitivity according to the protected area and carry out a walk test to confirm the required detection coverage.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"auto\"\u003eWiring\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eThe PIRW-T10 is a \u003cstrong\u003ewired 12V DC PIR detector\u003c\/strong\u003e and should be connected to a compatible wired security alarm panel. The supplied specifications identify an \u003cstrong\u003eNC alarm output\u003c\/strong\u003e and a separate \u003cstrong\u003eNC tamper output\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e Connect the detector to a suitable \u003cstrong\u003eDC 12V\u003c\/strong\u003e power supply from the compatible alarm panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e The detector receives its operating power from the alarm system; it does not use WiFi, GSM or RF wireless communication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Connect the \u003cstrong\u003eNC alarm output\u003c\/strong\u003e to a compatible alarm-panel zone input. The specified alarm contact rating is \u003cstrong\u003e28V DC, 0.15A\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther Connections:\u003c\/strong\u003e Connect the \u003cstrong\u003eNC anti-tamper output\u003c\/strong\u003e to the appropriate tamper circuit of the alarm panel where supported.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED:\u003c\/strong\u003e The detector includes an \u003cstrong\u003eLED ON\/OFF jumper\u003c\/strong\u003e, allowing the visual alarm indication to be enabled or disabled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImportant:\u003c\/strong\u003e Keep power OFF while making or changing wiring connections and verify the alarm-panel zone wiring before powering the detector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eProgramming\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eThe PIRW-T10 itself does \u003cstrong\u003enot require wireless pairing or RF programming\u003c\/strong\u003e. It operates as a wired detector connected to a compatible alarm panel.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect the Detector\u003c\/strong\u003e – Complete the 12V power, alarm-zone and tamper connections according to the alarm-panel wiring requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfigure the Alarm Zone\u003c\/strong\u003e – Program the connected alarm-panel zone according to the panel manufacturer's instructions for a wired PIR\/motion detector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet Detection Sensitivity\u003c\/strong\u003e – Adjust the detector's sensitivity as required for the installation and perform a walk test to confirm the desired detection area.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"auto\"\u003eOperation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower the Detector\u003c\/strong\u003e – Once connected to the alarm panel and powered with DC12V, the PIRW-T10 becomes ready to detect movement after the system's normal stabilization period.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetect Movement\u003c\/strong\u003e – When a person moves through the detector's infrared detection area, the dual-element PIR sensor detects the change and activates its alarm output. PIR sensors respond to changes in infrared\/heat patterns within their field of view. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSend Alarm Signal\u003c\/strong\u003e – The NC alarm circuit changes state when motion is detected, allowing the connected alarm panel to process the event according to its programmed zone settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisual Indication\u003c\/strong\u003e – When enabled, the red LED provides a visual indication of detection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTamper Monitoring\u003c\/strong\u003e – If the detector housing is opened or the tamper mechanism is activated, the NC tamper circuit can signal the connected alarm system when properly wired.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalk-Test the Detector\u003c\/strong\u003e – After installation, walk through different parts of the protected area and verify that the detector and connected alarm panel respond as expected.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 dir=\"auto\" class=\"PDq2pG_selectionAnchorContainer\"\u003eTroubleshooting\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProblem:\u003c\/strong\u003e PIRW-T10 does not detect movement.\u003cbr\u003e\u003cstrong\u003eSolution:\u003c\/strong\u003e Check the DC 12V power supply, alarm wiring and zone connection. Verify that the person is moving within the detector's 12 m \/ 110° coverage area and adjust the sensitivity if required. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProblem:\u003c\/strong\u003e Detector gives false alarms.\u003cbr\u003e\u003cstrong\u003eSolution:\u003c\/strong\u003e Check the detection area for heat sources, direct sunlight, moving curtains\/plants or strong airflow. Reposition the detector or reduce the sensitivity where appropriate. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProblem:\u003c\/strong\u003e Detection is weak or inconsistent.\u003cbr\u003e\u003cstrong\u003eSolution:\u003c\/strong\u003e Check for obstructions in front of the detector, verify the installation height and direction, and perform a walk test after adjusting the sensitivity. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProblem:\u003c\/strong\u003e Alarm panel does not receive the PIR signal.\u003cbr\u003e\u003cstrong\u003eSolution:\u003c\/strong\u003e Check the NC alarm-zone wiring and confirm that the connected alarm-panel zone is correctly configured for the detector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProblem:\u003c\/strong\u003e Tamper alarm remains active.\u003cbr\u003e\u003cstrong\u003eSolution:\u003c\/strong\u003e Check that the detector cover is properly closed and that the NC tamper circuit is correctly connected to the alarm panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eCommon Problems\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo motion detection\u003c\/strong\u003e – Check power, wiring, installation position and detection coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequent false alarms\u003c\/strong\u003e – Check heat sources, sunlight, airflow and moving objects; adjust sensitivity if necessary. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort detection coverage\u003c\/strong\u003e – Check for obstructions and confirm the detector is installed at the recommended height and correctly oriented.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED not indicating detection\u003c\/strong\u003e – Check the LED ON\/OFF jumper and confirm that the detector is receiving power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm panel not responding\u003c\/strong\u003e – Check the NC alarm output, zone wiring and alarm-panel programming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTamper indication\u003c\/strong\u003e – Check the detector cover and NC tamper wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eFAQs\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: What type of sensor is the PIRW-T10?\u003c\/strong\u003e\u003cbr\u003eA: The PIRW-T10 is a \u003cstrong\u003edual-element Passive Infrared (PIR) motion detector\u003c\/strong\u003e designed for wired security alarm systems.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: What is the detection range?\u003c\/strong\u003e\u003cbr\u003eA: The specified detection range is \u003cstrong\u003eup to 12 meters\u003c\/strong\u003e, with a \u003cstrong\u003e110° detection angle\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Does the PIRW-T10 require a wireless connection?\u003c\/strong\u003e\u003cbr\u003eA: No. It is a \u003cstrong\u003ewired detector\u003c\/strong\u003e and connects to a compatible alarm panel through physical wiring.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: What power supply does it use?\u003c\/strong\u003e\u003cbr\u003eA: The specified power supply is \u003cstrong\u003eDC 12V\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Does it have an alarm output?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The detector provides an \u003cstrong\u003eNC alarm output\u003c\/strong\u003e for connection to a compatible alarm panel.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Does it have tamper protection?\u003c\/strong\u003e\u003cbr\u003eA: Yes. It has an \u003cstrong\u003eNC anti-tamper output\u003c\/strong\u003e that can be connected to a compatible alarm panel.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Can the detection sensitivity be adjusted?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The supplied specifications include \u003cstrong\u003eadjustable sensitivity\u003c\/strong\u003e, allowing the detector to be tuned for the installation environment.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Does the detector have an LED indicator?\u003c\/strong\u003e\u003cbr\u003eA: Yes. It has a red LED indication, with an \u003cstrong\u003eLED ON\/OFF jumper\u003c\/strong\u003e for controlling the indication.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Is the PIRW-T10 pet immune?\u003c\/strong\u003e\u003cbr\u003eA: No. The supplied specification states \u003cstrong\u003ePet Immunity: No\u003c\/strong\u003e. Therefore, movement from pets may be detected.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Where should the detector be installed?\u003c\/strong\u003e\u003cbr\u003eA: The supplied specifications recommend an installation height of approximately \u003cstrong\u003e2.2 meters\u003c\/strong\u003e, with a clear view of the protected area.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Can it be installed outdoors?\u003c\/strong\u003e\u003cbr\u003eA: The supplied documentation supports \u003cstrong\u003eindoor security use\u003c\/strong\u003e. It should not be treated as an outdoor\/weatherproof detector.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eSpare Parts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePIR Sensor \/ Detector Unit\u003c\/strong\u003e – Replacement detector, subject to model compatibility and availability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Cover \/ Housing Components\u003c\/strong\u003e – Replacement housing parts, subject to availability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Accessories\u003c\/strong\u003e – Replacement fixing components, where available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eSpare parts will be provided subject to availability. Availability, design, size and appearance of replacement parts may vary depending on stock and product upgrades.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eWarranty\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 1 year against manufacturing defects under normal and proper use.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eWarranty does not cover:\u003c\/strong\u003e improper installation, incorrect wiring, unsuitable power supply, physical damage, water\/moisture damage, misuse, unauthorized modification, or damage caused by external factors. Warranty claims are subject to product inspection and verification.\u003c\/p\u003e\n\u003ch3\u003eVideos\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e[Installation Video]\u003c\/li\u003e\n\u003cli\u003e[Programming Video]\u003c\/li\u003e\n\u003cli\u003e[Product Demonstration Video]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eManuals\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e[User Manual]\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0746\/5261\/4961\/files\/71tQfGzP3vL._SL1500.jpg?v=1790321343\" alt=\"\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0746\/5261\/4961\/files\/814JR0_T65L._SL1500.jpg?v=1790321344\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e[Datasheet]:NA\u003c\/li\u003e\n\u003cli\u003e[Wiring Diagram]: Refer to manual\u003c\/li\u003e\n\u003cli\u003e[Catalogue \/ Brochure]: NA\u003c\/li\u003e\n\u003cli\u003e[Other Download]: NA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\" class=\"PDq2pG_selectionAnchorContainer\"\u003e\u003cstrong\u003eQ: What is the PIRW-T10?\u003c\/strong\u003e\u003cbr\u003eA: The PIRW-T10 is a \u003cstrong\u003ewired Passive Infrared (PIR) motion detector\u003c\/strong\u003e designed to detect movement and provide an alarm signal to a compatible security alarm panel.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: What is the detection range of the PIRW-T10?\u003c\/strong\u003e\u003cbr\u003eA: The detector provides up to \u003cstrong\u003e12 metres of detection range\u003c\/strong\u003e with a \u003cstrong\u003e110° detection angle\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Does the PIRW-T10 require a wired connection?\u003c\/strong\u003e\u003cbr\u003eA: Yes. It is a \u003cstrong\u003ewired PIR detector\u003c\/strong\u003e and must be connected to a compatible alarm panel using the required power, alarm and tamper wiring.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: What power supply does the detector use?\u003c\/strong\u003e\u003cbr\u003eA: The specified power supply is \u003cstrong\u003eDC 12V\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Can the PIRW-T10 be connected to a security alarm system?\u003c\/strong\u003e\u003cbr\u003eA: Yes. It provides an \u003cstrong\u003eNC alarm output\u003c\/strong\u003e for connection to a compatible wired security alarm panel.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Does it have tamper protection?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The detector has an \u003cstrong\u003eNC anti-tamper output\u003c\/strong\u003e, which can be connected to the tamper circuit of a compatible alarm panel.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Does the detector have an LED indicator?\u003c\/strong\u003e\u003cbr\u003eA: Yes. It has a \u003cstrong\u003ered LED alarm indicator\u003c\/strong\u003e. The LED ON\/OFF jumper can be used to control the visual indication.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Can the sensitivity be adjusted?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The PIRW-T10 includes \u003cstrong\u003eadjustable sensitivity\u003c\/strong\u003e to help configure detection according to the installation environment.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: What installation height is recommended?\u003c\/strong\u003e\u003cbr\u003eA: The supplied specifications recommend installing the detector at approximately \u003cstrong\u003e2.2 metres\u003c\/strong\u003e above the floor.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Can the PIRW-T10 be installed outdoors?\u003c\/strong\u003e\u003cbr\u003eA: The supplied product information is for \u003cstrong\u003eindoor security applications\u003c\/strong\u003e. It should not be treated as an outdoor\/weatherproof detector.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Is the PIRW-T10 pet immune?\u003c\/strong\u003e\u003cbr\u003eA: No. The supplied specification states \u003cstrong\u003ePet Immunity: No\u003c\/strong\u003e, so movement from pets may potentially be detected.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: What areas can the PIRW-T10 monitor?\u003c\/strong\u003e\u003cbr\u003eA: It can be used for indoor motion detection in \u003cstrong\u003ehomes, offices, shops, corridors, entrances and other protected areas\u003c\/strong\u003e when connected to a compatible alarm system.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: What should I do if the detector gives false alarms?\u003c\/strong\u003e\u003cbr\u003eA: Check for heat sources, direct sunlight, moving objects, strong airflow or other conditions within the detection area. Reposition the detector and adjust sensitivity if required.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: What should I check if the detector does not detect movement?\u003c\/strong\u003e\u003cbr\u003eA: Check the \u003cstrong\u003eDC12V power supply, alarm wiring, alarm-panel zone configuration, detector positioning and sensitivity\u003c\/strong\u003e, then perform a walk test.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Can the detector work with any alarm panel?\u003c\/strong\u003e\u003cbr\u003eA: It should be used with a \u003cstrong\u003ecompatible wired alarm panel\u003c\/strong\u003e that supports the detector's power and NC alarm\/tamper connections. Always verify the panel's terminal configuration before wiring. \u003cspan class=\"contents\"\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eQ: Does the PIRW-T10 include a camera?\u003c\/strong\u003e\u003cbr\u003eA: No. It is a \u003cstrong\u003emotion detection sensor\u003c\/strong\u003e and does not provide video surveillance.\u003c\/p\u003e\n\u003ch3\u003eEscalation to Support\u003c\/h3\u003e\n\u003cp\u003eIf the issue cannot be resolved using the information above, P\u003cspan\u003elease contact Navkar Systems at Whatsapp Support number: 91384 68548 with the following information:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Model:\u003c\/li\u003e\n\u003cli\u003ePurchase Date:\u003c\/li\u003e\n\u003cli\u003eProblem Description:\u003c\/li\u003e\n\u003cli\u003eInstallation Details:\u003c\/li\u003e\n\u003cli\u003ePhotos \/ Videos:\u003c\/li\u003e\n\u003cli\u003ePrevious Troubleshooting Performed:\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NavKar Systems","offers":[{"title":"Default Title","offer_id":56463471575345,"sku":null,"price":1599.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5261\/4961\/files\/71l-f3D6aPL._SL1500.jpg?v=1790321554","url":"https:\/\/navkarsys.com\/hi\/products\/pirw-t10-wired-pir-sensor","provider":"Navkar Systems","version":"1.0","type":"link"}