BMT-22 Wi-Fi Fingerprint Rim Lock – Setup Guide

Setup guide · BMT-22

Fit the BMT-22 on your door, add batteries, set your own admin and connect the Tuya app. Unlock by fingerprint, password, card, app or key.

BMT-22 double fingerprint Wi-Fi rim lock

What’s in the box

  • Front lock panel
  • Rear lock panel
  • Locking mortise
  • 2 RFID cards
  • 2 mechanical keys
  • Screw kit
  • User manual
4 AA batteries are not included. No wiring is needed: the lock runs on batteries. For long-term continuous use, a compatible 12 V 2 A adapter is recommended (sold separately).

Tools you’ll need

  • Drill with wood/metal bits
  • Hole saw for the spindle and cable hole
  • Screwdriver set
  • Measuring tape and marker
  • 4 AA batteries
  • Smartphone with the Tuya / Smart Life app

Install

  1. Check the door.Door thickness must be 20 to 80 mm. It suits wood, steel and iron doors, opening left or right.
  2. Mark the holes.Use the template or the panels in the box to mark the holes for the fixing screws, spindle and cable on the door.
  3. Drill.Drill the holes from both sides to avoid splitting the door.
  4. Fit the front panel.Pass the cable through the door and hold the front panel in place outside.
  5. Fit the rear panel.Connect the cable plug to the rear panel carefully, then screw the rear panel on from inside.
  6. Fit the mortise and strike.Fit the locking mortise and strike as shown in the user manual, so the bolt enters cleanly. Set it for a left- or right-opening door.
  7. Add batteries.Insert 4 AA batteries in the rear panel.
Do not pinch the cable between the panel and the door. A cut cable stops the keypad working.

Set up and pair with the app

Set your admin

  1. Enter the setup menu on the keypad, using the default admin code given in the user manual.
  2. Add your fingerprint or password as the first administrator. This replaces the default code.
  3. Add users: fingerprints (up to 100), passwords (up to 100) and IC cards (up to 100).

Connect the Tuya app

  1. Install the Tuya Smart or Smart Life app and create an account.
  2. Connect your phone to 2.4 GHz home Wi-Fi.
  3. Put the lock in network pairing mode from its setup menu, as described in the user manual.
  4. In the app, tap + to add a device and follow the steps for a Wi-Fi door lock.
  5. Enter your Wi-Fi password and wait for pairing to finish.
Anti-peep password: you can type extra digits before and after your real password, so nobody can copy it by watching.

Daily use

  1. Touch a registered finger on the sensor, enter your password and confirm, or tap a card.
  2. Use the Tuya app to unlock from your phone.
  3. If the batteries are flat, power the lock from a power bank through the Micro USB port, then unlock.
  4. Keep a mechanical key outside the house for emergencies.

Troubleshooting

Problem Try this
Lock is dead, no lights Replace all 4 AA batteries. For an instant fix, connect a power bank to the Micro USB port.
“There is no wire for power supply” None is needed. The BMT-22 runs on 4 AA batteries. A 12 V 2 A adapter is optional for continuous use.
Fingerprint not accepted Clean the sensor and your finger. Re-enrol the finger and press it flat, from slightly different angles.
App cannot find the lock Use 2.4 GHz Wi-Fi. Keep the phone and router near the lock. Restart pairing mode from the lock menu.
Keypad works but the bolt does not move Check the cable between the panels is plugged in and not pinched. Check the bolt is not jammed against the strike.
Forgot the admin code Use the reset procedure in the user manual, or WhatsApp us with your bill.

Safety

  • Replace batteries when the low-battery warning appears.
  • Keep a mechanical key outside the house.
  • Water exposure or water damage to the board is not covered by warranty. Shield the lock from direct rain.
  • Delete users who should no longer have access.

Manuals, videos and product page

Video guides

Installation and setup videos for NavKar products.

Watch on YouTube
BMT-22 product page

Specifications, photos and accessories.

View product

Still need help?

No warranty for water exposure or board damage from water or moisture. Other warranty terms are as stated on your bill and product page.

Send us your model, purchase date and a photo or short video of the problem. WhatsApp +91 91384 68548, Mon–Sat 10:00–5:30.

Chat on WhatsAppAll manuals