Skip to product information
1 of 3


Weatherproof RF Pin Access Panel

Weatherproof RF Pin Access Panel

Regular price Rs. 3,000.00
Regular price Rs. 3,000.00 Sale price Rs. 3,000.00
Sale Sold out
Tax included. Shipping calculated at checkout.

Description :-

The unit is single door multifunction standalone access controller or a Wiegand output keypad card reader. It is suitable for mounting either indoor or outdoor in harsh environments. This unit supports up to 2000 users in either a Card, 4 digit PIN, or a Card + PIN option. The inbuilt card reader supports 125KHZ EM cards, 13.56MHz Mifare cards. The unit has many extra features including lock output current short circuit protection, Wiegand output, and a backlit keypad. These features make the unit an ideal choice for door access not only for small shops and domestic households but also for commercial and industrial applications such as factories, warehouses, laboratories, banks and prisons.

Features :- 

  • * Waterproof degree, Indoor/IP68
  • * Full programming from the keypad
  • * 2000 users, supports Card, PIN, Card + PIN
  • * Can be used as a standalone keypad
  • * Backlight keys
  • * Wiegand 26 input for connection to external reader
  • * Wiegand 26 output for connection to a controller
  • * Adjustable Alarm time and Door Open time
  • * Very low power consumption (30mA)
  • * Fast operating speed, <20ms with 2000 users
  • * Lock output current short circuit protection
  • * Easy to install and program
  • * Built in buzzer
  • * Red, Yellow and Green LEDS display the working status

Specifications :-

 Operating Voltage DC 12V
User Capacity 2000
Card Reading Distance 2-5 cm 
Active Current  <60mA
Lock Output Load Max 3A
Alarm Output Load Max 20A
Operating Humidity 10%-90% RH
Waterproof Degree Indoor/IP68
Adjustable Door Relay Time 0-99 Seconds
Adjustable Alarm Time  0-3 minutes
Wiegand Interface Wiegand 26 bit
Wiring Connections Electric Lock, Exit Button, External Reader


Installation :- 

  • Remove the back cover form the keypad using the supplied special screw drive
  • Drill 2 holes on the wall for the self-tapping screw and 1 hole for the cable
  • Put the supplied rubber bungs to into the two holes
  • Fix the back cover firmly on the wall with 2 self tapping screws
  • Thread the cable through the cable hole
  • Attached the keypad to the back cover
View full details