SGM-750 Sliding Gate Motor 750W 1500 Kg

Product Overview

The NAVKAR SYSTEMS SGM-750 Sliding Gate Motor is a heavy-duty automatic gate opener designed to operate sliding gates up to 1500 kg. It provides convenient remote-controlled opening and closing, with 750W motor power, limit switches, built-in thermal protection and IP55 protection for reliable operation. The motor also includes a manual release mechanism that allows the gate to be opened or closed manually during a power failure. It is suitable for residential, commercial and industrial sliding gates and can be expanded with optional accessories such as photocell sensors, Tuya WiFi PCB and gear rack.

• Note: Photocell Sensor, Tuya Wifi PCB, Gear Rack needs to be purchased separately as per requirement.

Main Purpose

The NAVKAR SYSTEMS SGM-750 is designed to automatically open and close sliding gates weighing up to 1500 kg, providing convenient and controlled access for residential, commercial and industrial properties.

Key Benefits

• Heavy-Duty Performance: 750W motor provides reliable power for operating large sliding gates.
• Convenient Remote Operation: Allows the gate to be opened and closed using remote controls.
• Manual Backup: Built-in release clutch allows manual operation during power failure.
• Reliable Protection: Built-in thermal protection helps protect the motor from overheating.
• Outdoor Ready: IP55 protection provides resistance against dust and water exposure.
• Controlled Gate Movement: Limit switches help stop the gate automatically at the correct open and close positions.
• Expandable System: Supports optional accessories such as photocells and Tuya WiFi control.

Important Features

• 750W powerful motor
• Up to 1500 kg gate capacity
• Remote-controlled operation
• Magnetic or mechanical limit switch
• Built-in thermal protection at approximately 125°C
• Manual clutch release with keys
• IP55 protection
• Suitable for residential and commercial sliding gates
• Optional Tuya WiFi PCB and photocell sensor support
• Gear rack available separately

Product Specifications

• Model: SGM-750
• Product Type: Automatic Sliding Gate Motor
• Brand: NAVKAR SYSTEMS
• Power Supply: 220V AC, 50Hz
• Motor Power: 750W
• Gate Capacity: Up to 1500 kg
• Communication: RF Remote Control / Wired Accessories
• Operating Range: Not specified
• Limit Switch: Magnetic or Mechanical
• Thermal Protection: Built-in protection at approximately 125°C
• Protection Rating: IP55
• Installation Type: Ground Mounted
• Dimensions: 27 × 20.5 × 33 cm including pinion; mounting plate 27 × 17 cm
• Mounting Base Plate Dimension: Length-27 cm, width-17 cm
• Mounting Base Plate Dimension: Length-27 cm, width-17 cm
• Weight: 
• Manual Release: Yes, with 2 keys
• Other Specifications: 30:1 reduction ratio, remote controls included, photocell sensor and Tuya WiFi PCB available separately, gear rack required separately.
  

Applications

• Residential Gate Automation: Automates sliding gates for homes, villas, apartments, and residential societies.
• Commercial Gate Automation: Suitable for offices, shops, hotels, and commercial properties requiring automated vehicle access.
• Industrial Gate Automation: Suitable for factories, warehouses, industrial premises, and large sliding gates up to 1500 kg.
• Parking Entrance Control: Can be used for automated entrances and exits in residential, commercial, and industrial parking areas.

Suitable For

• Sliding Gates: Suitable for properly installed sliding gates weighing up to 1500 kg.
• Residential & Commercial Properties: Suitable for homes, societies, offices, hotels, warehouses, and commercial premises.
• Remote-Controlled Access: Suitable where convenient opening and closing using remote controls is required.
• Indoor & Outdoor Installation: Suitable for appropriate outdoor gate installations with IP55-protected motor housing.
• Gates Requiring Manual Backup: Suitable where manual gate operation is required during power failure.

Not Suitable For

• Swing Gates: Designed specifically for sliding gates and not suitable for swing-gate applications.
• Gates Above 1500 kg: Not suitable for gates exceeding the specified 1500 kg capacity.
• Damaged or Difficult-to-Move Gates: Not suitable where the gate has excessive friction, damaged tracks, or mechanical obstructions.
• Improper Power Supply: Requires the specified 220V AC, 50Hz power supply.
• Unprotected Extreme Conditions: Although IP55 protected, it should not be exposed to conditions beyond its specified protection level.
• Applications Without Proper Installation: Correct mounting, gear-rack alignment, limit-switch adjustment, and electrical connections are required for reliable operation.

Package Contents

• 1 × (SGM-750) 750W 1500 KG Sliding Gate Motor
• 2 × RF Remote Controls
• 2 × Manual Release Keys
• 1 × Mounting Base Plate
• Limit Switches – Magnetic or Mechanical, as applicable
• 1 × User Manual
  

Installation

1. Prepare the Gate: Ensure the sliding gate moves smoothly by hand and the track is clean, level and free from obstruction.
2. Mount the Motor: Fix the mounting base plate firmly on a suitable concrete/metal foundation and position the motor so the pinion aligns correctly with the gate rack.
3. Install Limit Magnets: Fix the open and close limit magnets/stoppers on the rack at the required positions and adjust them so the motor stops at the correct locations.
4. Connect & Test: Complete the electrical connections, release the clutch to check manual movement, then engage the clutch and test opening, closing and stopping operation.

Wiring

The motor uses a 220V AC power supply and the control board provides dedicated terminals for the motor, limit switches and accessories. Electrical installation should be carried out by a qualified person.

• Power: Connect the AC 220V supply to the control-board power terminals as marked in the wiring diagram.
• Input: Connect the open/close limit switches to the O.P / COM / C.L terminals.
• Output: Connect the motor wires to the L1 / COM / L2 motor terminals according to the supplied wiring diagram.
• Other Connections: Optional accessories such as a manual push button, infrared/photocell sensor, keypad or access-control system can be connected to the designated accessory terminals.

Programming

1. Program Remotes: Press the controller's remote learning/study key for approximately 1 second, then press the required button on the remote to store it. The controller supports multiple learning-code remotes.
2. Set Motor Direction: Check the opening and closing direction. If the direction is reversed, use the motor-direction adjustment provided on the control board and test again.
3. Set Automatic Closing: If automatic closing is required, enable the automatic shutdown function and set the required delay according to the control-board settings. For safety, photocell/infrared protection can be connected where required.

Operation

1. Open/Close: Press the programmed remote button to operate the gate. The motor will drive the gate in the selected direction until the corresponding limit position is reached.
2. Stop: Press the stop control when manual stopping is required. The control panel also supports external control through compatible push buttons/accessories.
3. Manual Release: During a power failure, use the supplied clutch/release key to disengage the motor and move the gate manually. Re-engage the clutch before returning to normal powered operation.

Troubleshooting

• Problem: Motor does not work
  Solution: Check the 220V power supply, fuse and electrical connections. If thermal protection has activated, allow the motor to cool before restarting.
• Problem: Gate opens or closes but does not stop correctly
  Solution: Check the open/close limit switch and magnet positions. Adjust the limit magnets and verify the O.P / COM / C.L wiring.
• Problem: Gate moves in the wrong direction or does not operate correctly
  Solution: Check the motor L1 / COM / L2 connections and adjust the motor direction setting on the control board.

Common Problems

• Remote does not operate the gate – Re-program the remote using the controller's learning/study key and check the remote battery.
• Gate movement is obstructed or uneven – Check the gate track, rollers and rack for obstruction or excessive resistance.
• Gate cannot be moved during power failure – Use the supplied clutch/release key to disengage the motor and move the gate manually.

FAQs

Q: What power supply does the motor require?
A: The motor operates on 220V AC power as specified in the supplied manual.

Q: Can the gate be opened manually during a power failure?
A: Yes. Use the supplied clutch/release key to disengage the motor and operate the gate manually.

Q: Can additional accessories be connected?
A: Yes. The control board provides terminals for compatible accessories such as a manual push button, infrared/photocell sensor and access-control devices.

Spare Parts

• Remote Control – Replacement remote for operating the gate motor.
• Limit Magnet / Limit Switch – Used to control the gate's open and close stopping positions.
• Clutch/Release Key – Used to manually disengage the motor during power failure or servicing.

Note: Spare parts will be provided subject to availability. Availability, design, size, and appearance of replacement parts may vary due to product upgrades or model changes.

Warranty

Warranty Period: 1 Year

The SGM-750 Sliding Gate Motor is covered by a 1-year warranty against manufacturing defects under normal use. The warranty applies to the motor and covered components as per the manufacturer's warranty terms.

The warranty does not cover damage caused by improper installation, incorrect wiring, water/moisture exposure, physical damage, misuse, unauthorized modification, voltage fluctuations, accidents, or normal wear and tear.

Warranty service is subject to inspection and verification. Damage caused by accessories or components not supplied with the product may not be covered.

Videos

• [Installation Video]

• [Programming Video]

• [Product Demonstration Video]

Manuals

• [User Manual]
  

Downloads

• [Datasheet]:NA
• [Wiring Diagram]: Refer to Manual
• [Catalogue / Brochure]: NA
• [Other Download]: NA

Customer Questions

Q: What is the power requirement of the SGM-750 Sliding Gate Motor?
A: The motor operates on 220V AC power as specified in the supplied product manual.

Q: Can the gate be operated manually during a power failure?
A: Yes. Use the supplied clutch/release key to disengage the motor, allowing the gate to be opened or closed manually.

Q: Can the motor be operated using a remote control?
A: Yes. The control board supports remote-control operation, and the supplied remotes can be programmed using the controller's learning/study function.

Q: Does the motor have limit control?
A: Yes. The system uses open and close limit switches/magnets to stop the gate at the programmed end positions.

Q: Can safety sensors or other accessories be connected?
A: Yes. The control board provides terminals for compatible accessories such as infrared/photocell sensors, manual push buttons and access-control devices.

Q: Can the motor be used for automatic gate closing?
A: Yes. The controller supports an automatic shutdown/closing function, which can be enabled and configured according to the control-board settings.

Q: Is the photocell sensor included with the motor?
A: No. The photocell sensor is not included and needs to be purchased separately if required.

Q: Is the Tuya Wi-Fi PCB included?
A: No. The Tuya Wi-Fi PCB is optional and needs to be purchased separately if Wi-Fi control is required.

Q: Is the gear rack included with the motor?
A: No. The gear rack needs to be purchased separately according to the gate installation requirements.

Q: What should I do if the gate does not stop at the correct position?
A: Check the limit switch/magnet position and wiring, then adjust the limit position so the controller correctly detects the open and close points.

Escalation to Support

If the issue cannot be resolved using the information above, Please contact Navkar Systems at Whatsapp Support number: 91384 68548 with the following information:

• Product Model:
• Purchase Date:
• Problem Description:
• Installation Details:
• Photos / Videos:
• Previous Troubleshooting Performed: