• EM-605 EM lock 600 lbs
  • BRZ-EM Z bracket
  • BRL-EM L bracket
  • SSW-44 exit button
  • PK-80 power supply 12 V 3 A
1 5

NavKar Systems

Combo-CN311 Single Door EM Lock Kit 600 lbs with Z and L Brackets, Exit Button and 12V Power Supply

Combo-CN311 Single Door EM Lock Kit 600 lbs with Z and L Brackets, Exit Button and 12V Power Supply

Rs. 4,099
Rs. 4,099
Sale Sold out
Taxes included. Shipping calculated at checkout.
Free shipping, pan-India
Secure online payment
Prices include GST
Free tech support
Enquire for bulk Ask an expert

A ready kit to lock a single wooden, metal or framed glass door with a 600 lbs electromagnetic lock. It includes the EM-605 lock with door status feedback, Z and L brackets for in-swing doors, a stainless steel exit button and the PK-80 12 V 3 A access supply with adjustable door-open time.

In the box

  • 1 x EM-605 EM lock 600 lbs with feedback
  • 1 x BRZ-EM Z bracket
  • 1 x BRL-EM L bracket
  • 1 x SSW-44 stainless steel exit button
  • 1 x PK-80 access control power supply 12 V 3 A

Full specifications, wiring diagram and step by step installation are below. Free technical help for setup is available on WhatsApp.

NavKar Systems Combo-CN311

Specifications

A ready kit to lock a single wooden, metal or framed glass door with a 600 lbs electromagnetic lock. It includes the EM-605 lock with door status feedback, Z and L brackets for in-swing doors, a stainless steel exit button and the PK-80 12 V 3 A access supply with adjustable door-open time.

EM-605 EM lock 600 lbs
EM-605 EM lock 600 lbs
BRZ-EM Z bracket
BRZ-EM Z bracket
BRL-EM L bracket
BRL-EM L bracket
SSW-44 exit button
SSW-44 exit button
PK-80 power supply 12 V 3 A
PK-80 power supply 12 V 3 A
EM-605: Holding force280 kg / 600 lbs
EM-605: Working voltageDC 12 V (listing also says adjustable 12/24 V)
EM-605: Working current110 mA
EM-605: Working modePower on to lock, power off to unlock
EM-605: MaterialAluminium alloy shell and iron plate
EM-605: DoorSingle door
BRL-EM: Bracket typeL shaped
BRL-EM: MaterialZinc
BRL-EM: FinishAnodized
BRL-EM: Size (L x W x D)250 x 48 x 30 mm
BRL-EM: Net weight0.242 kg
SSW-44: Panel materialStainless steel
SSW-44: ColourSilver
SSW-44: Panel size86 x 86 x 6 mm
SSW-44: Protruding button size22 x 2 mm
PK-80: Output voltage and currentDC 12 V, 3 A
PK-80: Output power36 W
PK-80: Input voltageAC 110 to 240 V (listing title)
PK-80: Input frequency50 to 60 Hz
PK-80: Delay0 to 15 seconds, adjustable

In the box

  • 1 x EM-605 EM lock 600 lbs with feedback
  • 1 x BRZ-EM Z bracket
  • 1 x BRL-EM L bracket
  • 1 x SSW-44 stainless steel exit button
  • 1 x PK-80 access control power supply 12 V 3 A

Wiring diagram

Mains110 to 240 V ACPhase (L)Neutral (N)PK-80 supply12 V DC, 3 A, delay 0 to 15 sAC LAC N+12VLOCK (NC)GNDPUSHEM-605 EM lock600 lbs, 12 V DC, fail-safeLock +Lock −+ (red)− (black)Fit a 1N4007 diode across the lock wiresSSW-44 exit buttonPush to openCOMNOPUSHTerminal names can differ by batch: match each wire to the label printed on your PK-80. Mains wiring by a qualified electrician.

Installation steps

  1. Choose the side: the magnet goes under the top of the door frame on the secure (inside) side, near the free edge of the door, and the steel armature plate goes on the door.
  2. For a door that opens away from the frame (in-swing), fix the L bracket on the frame for the magnet and the Z bracket on the door for the armature plate. For an out-swing door the brackets are usually not needed.
  3. Fix the armature plate with its rubber washers so it can rock slightly and sit flat against the magnet face when the door closes.
  4. Fix the exit button inside, beside the door, at a comfortable hand height.
  5. Mount the PK-80 supply indoors near the door, on a dry wall away from water, where you can reach it later. Mains wiring must be done by a qualified electrician with the power switched off.
  6. Run 4 core cable from the supply to the lock and to the exit button. Connect the wires exactly as in the wiring diagram, and check polarity twice before switching on.
  7. Fit a 1N4007 diode across the two lock wires (stripe towards +12 V) unless the lock already has one. It stops the voltage spike from the magnet resetting other devices.
  8. Set the door-open time on the PK-80 (adjustable from 0 to 15 seconds) so people have enough time to pass.
  9. Test: switch on and the door should hold. Press the exit button and the door should release for the set time. Switch the power off and the door should release (fail-safe).
  10. On escape routes, local fire rules may require an emergency break-glass unit that cuts power to the lock. It is not included in this kit.
Download datasheet (PDF)

Specifications from NavKar Systems' product details for this model. All prices include GST.

Frequently asked questions

Which doors does this kit suit?

Single wooden, metal or framed glass doors. Use the Z and L brackets when the door opens away from the frame.

How does the door open from inside?

Press the SSW-44 exit button. The PK-80 cuts power to the lock for the door-open time you set, from 0 to 15 seconds.

What happens in a power cut?

The EM-605 is fail-safe: it holds only while powered, so the door releases when power is lost.

Can I add a card reader or keypad later?

Yes. The lock is wired through a 12 V supply, so a standard 12 V access reader can be added later, wired through its COM and NC relay contacts.

What is the holding force?

600 lbs, about 280 kg, as listed for the EM-605.

What mains voltage does the supply need?

The PK-80 is listed for AC 110 to 240 V input, 50 to 60 Hz.

View full details